Saintly Fish Posted July 23, 2021 Share Posted July 23, 2021 Just over 7m of oceanflex 70mm2 flexible tinned copper cable 70c moisture resistant. cost me £260 + p&p. make me an offer. Quote Link to comment Share on other sites More sharing options...
Andy135 Posted July 23, 2021 Share Posted July 23, 2021 Interested in this but need to measure the cross-sectional area of the stuff that's already on the boat before I pull the trigger. If someone else makes you an offer first then no worries, but will let you know once I know what size I need. Suspect it may be too big but will confirm. Saintly Fish 1 Quote Link to comment Share on other sites More sharing options...
suzook12 Posted July 23, 2021 Share Posted July 23, 2021 Is that 2 core? IE red and the black together or 2 x single lengths? 5 hours ago, Andy135 said: Interested in this but need to measure the cross-sectional area of the stuff that's already on the boat before I pull the trigger. If someone else makes you an offer first then no worries, but will let you know once I know what size I need. Suspect it may be too big but will confirm. You can't really have too big Andy, too small on the other hand is a different matter Quote Link to comment Share on other sites More sharing options...
Andy135 Posted July 23, 2021 Share Posted July 23, 2021 Just now, suzook12 said: You can't really have too big Andy, too small on the other hand is a different matter I know, but the bigger the cable, the harder it is to make a good job of fitting cable end crimps which is why I'd rather go for the "right" size instead of over-sized. Quote Link to comment Share on other sites More sharing options...
suzook12 Posted July 23, 2021 Share Posted July 23, 2021 9 minutes ago, Andy135 said: I know, but the bigger the cable, the harder it is to make a good job of fitting cable end crimps which is why I'd rather go for the "right" size instead of over-sized. ?? How so mate? Cable end crimps are a piece of pee https://www.amazon.co.uk/AllRight-Hydraulic-Crimper-Terminals-Crimping/dp/B01C6YQHLS Quote Link to comment Share on other sites More sharing options...
Andy135 Posted July 23, 2021 Share Posted July 23, 2021 3 hours ago, suzook12 said: ?? How so mate? Cable end crimps are a piece of pee https://www.amazon.co.uk/AllRight-Hydraulic-Crimper-Terminals-Crimping/dp/B01C6YQHLS Yeah, but that requires me to buy the crimping tool and I already have plenty of tools that I bought for a single, one off job (anyone want a valve spring compressor, or a pair of coil spring compressors, or a ball joint fitting & removal tool?). The smaller the diameter the better the job I can do with the tools I already have available. Or, I might even break out the soldering iron instead. GPSguru 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted July 23, 2021 Author Share Posted July 23, 2021 1 hour ago, suzook12 said: Is that 2 core? IE red and the black together or 2 x single lengths? 2 x separate lengths mate. suzook12 1 Quote Link to comment Share on other sites More sharing options...
suzook12 Posted July 23, 2021 Share Posted July 23, 2021 3 hours ago, Andy135 said: Yeah, but that requires me to buy the crimping tool and I already have plenty of tools that I bought for a single, one off job (anyone want a valve spring compressor, or a pair of suspension spring compressors, or a ball joint fitting & removal tool?). The smaller the diameter the better the job I can do with the tools I already have available. Or, I might even break out the soldering iron instead. Can't beat having the right tool for the job!! Quote Link to comment Share on other sites More sharing options...
Geoff Posted July 24, 2021 Share Posted July 24, 2021 17 hours ago, Saintly Fish said: 2 x separate lengths mate. I am sure that is exactly what Jonc desperately needs, but must be 2 core. Geoff. Andy135, GPSguru and JonC 1 1 1 Quote Link to comment Share on other sites More sharing options...
GPSguru Posted July 24, 2021 Share Posted July 24, 2021 On 7/23/2021 at 5:02 PM, Andy135 said: Yeah, but that requires me to buy the crimping tool and I already have plenty of tools that I bought for a single, one off job (anyone want a valve spring compressor, or a pair of coil spring compressors, or a ball joint fitting & removal tool?). The smaller the diameter the better the job I can do with the tools I already have available. Or, I might even break out the soldering iron instead. Blow lamp and solder bucket terminal 👍 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted July 27, 2021 Share Posted July 27, 2021 On 7/23/2021 at 10:36 AM, Andy135 said: Interested in this but need to measure the cross-sectional area of the stuff that's already on the boat before I pull the trigger. If someone else makes you an offer first then no worries, but will let you know once I know what size I need. Suspect it may be too big but will confirm. Will have to pass on this I'm afraid. The stuff I need is 25mm2. Quote Link to comment Share on other sites More sharing options...
Andy135 Posted July 27, 2021 Share Posted July 27, 2021 5 minutes ago, JonC said: It really is a shame that he hasn’t got it in other colours . I'm surprised he didn't have them in rainbow stripes. Quote Link to comment Share on other sites More sharing options...
mick Posted July 27, 2021 Share Posted July 27, 2021 20 minutes ago, JonC said: The only draw back with rainbow coloured cable is if you connect it the wrong way around changing the polarity I fink it`s ok as long as bof ends r same color Quote Link to comment Share on other sites More sharing options...
DINOBOY Posted August 29, 2021 Share Posted August 29, 2021 On 7/24/2021 at 11:56 PM, GPSguru said: Blow lamp and solder bucket terminal 👍 That’s the way I do it. GPSguru 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.