Jump to content

Garmin Navionics Vision+


Recommended Posts

13 minutes ago, GPSguru said:

Ok, I have had a meaningful conversation with tech support at Southampton, and confirmed my suspicions.

If you have the vision + chart card, you cant just plug it in, because although the basic chart will work, a lot of the other stuff like birds eye view, relief shading, and guidance will not work.

The only way all the functionality can be achieved is to load the area of interest via active captain. Yes, Garmin have changed the ‘tiles’ in favour of a ‘selected area’. Both myself and the support guy preferred the tile system.

Neil, you will need to register your chart via active captain, or Garmin express, then upload the area of interest to your active captain sd card in the plotter. The tech guy said it is best if you ring them as you may need to delete a file on the Garmin card to make life easier. 

TBH daily updates on the vision + will be a PITA as you will need to reload the selected area on each update !

However, stuff doesn't change that much so I would only do it every 6  months or so.

Hope that helps ….

Thanks Ian, it does. Last night I managed to down load 4.14gb of data from 4 squares stretching along the south coast and Channel Islands. This I will take to the boat and transfer to the plotter but will ring Garmin support before I do it! 
I love the simplicity of the Garmin instruction sheet that accompanies the card. Shame the reality is a polar opposite 🤣

Link to comment
Share on other sites

4 minutes ago, Saintly Fish said:

Thanks Ian, it does. Last night I managed to down load 4.14gb of data from 4 squares stretching along the south coast and Channel Islands. This I will take to the boat and transfer to the plotter but will ring Garmin support before I do it! 
I love the simplicity of the Garmin instruction sheet that accompanies the card. Shame the reality is a polar opposite 🤣

If you need to call them …… +44 23 8052 4000

Link to comment
Share on other sites

28 minutes ago, JonC said:

What’s a shame is that the installation team is so slow. My transducer is still sitting in the box 

 

Wot, you forgotten how to use a screwdriver, or is that beyond the intelligence of essex clowns 🤷‍♂️🤣🤣🤣🤣🤣

Link to comment
Share on other sites

So I spent an hour and a half today sat on my boat tidying up shit that didn't need tidying, whilst the charts transferred. Got to 98% and got an error message saying I had insufficient space on the active captain card !!!! 
FFS I'd just got off the phone to Garmin and nobody mentioned a potential lack of storage! 😩🤬

Link to comment
Share on other sites

2 minutes ago, JonC said:

We all said about storage. 
At least yor boat is nice and tidy. 👍

Yeah, but what I don't get is this....

You get a 32gb card. The file transfer is approx 5gb. 
So how the hell can I be out of storage?

What am I not understanding here?

Link to comment
Share on other sites

49 minutes ago, Saintly Fish said:

Yeah, but what I don't get is this....

You get a 32gb card. The file transfer is approx 5gb. 
So how the hell can I be out of storage?

What am I not understanding here?

If it has been there a while, it may well have stored software updates and other stuff. Format it on a PC and then put it back in and recreate an active captain card.

Edited by GPSguru
Link to comment
Share on other sites

10 minutes ago, GPSguru said:

If it has been there a while, it may well have stored software updates and other stuff. Format it on a PC and then put it back in and recreate an active captain card.

How do I know which one it is though? I have 4 cards in 2 plotters!!

Link to comment
Share on other sites

7 minutes ago, GPSguru said:

Take out each one in turn and  IIRC it will tell you on the plotter that you have removed the active captain card.

Why do I have 4 cards anyway? Is it because the plotters come with a base and active card? Then the two are networked together! 
so, 2 of 4 not needed!! 

Link to comment
Share on other sites

34 minutes ago, Saintly Fish said:

Why do I have 4 cards anyway? Is it because the plotters come with a base and active card? Then the two are networked together! 
so, 2 of 4 not needed!! 

I dont know, mine will run without any cards, but I keep one active captain in one plotter and a blank card in the other plotter for screen dumps etc.

Link to comment
Share on other sites

4 hours ago, JonC said:

I had it wrapped around my head, I’m only onG3 vision. 

DDD346AF-7B5E-4C76-902B-DCA6B26AF29D.jpeg

 

That will still require you to load it via active captain to get all the options, especially relief shading.

Once you have registered it to your Garmin account, it will show on the active captain app.

 

 

Link to comment
Share on other sites

1 hour ago, JonC said:

Should I be able to access the charts from my phone? 

Yes, provided that the chart is registered to your Garmin account, which you can do via Garmin express, or Active Captain.

You need to access the charts on your phone / ipad to upload the selected area from active captain.

Link to comment
Share on other sites

Turns out I’ve got worldwide charts on my phone not jus Oz. Just been looking at the amazing detail of the sea floor around the areas I used to fish around the IOW, almost makes me want to fish it again. Some of the detail of the wrecks is pretty impressive. A couple from St Catherine’s IOW.

56FE495C-70ED-455E-B98D-B3518392350C.thumb.jpeg.2ada715b6d616877e872d6cb732276bc.jpeg

0841DF4F-0AC8-4DBD-9961-02D197CCB1AC.thumb.png.c9f4be456a51a294b8d7093493b38a0e.png

Edited by JDP
Link to comment
Share on other sites

1 hour ago, JDP said:

Turns out I’ve got worldwide charts on my phone not jus Oz. Just been looking at the amazing detail of the sea floor around the areas I used to fish around the IOW, almost makes me want to fish it again. Some of the detail of the wrecks is pretty impressive. A couple from St Catherine’s IOW.

56FE495C-70ED-455E-B98D-B3518392350C.thumb.jpeg.2ada715b6d616877e872d6cb732276bc.jpeg

0841DF4F-0AC8-4DBD-9961-02D197CCB1AC.thumb.png.c9f4be456a51a294b8d7093493b38a0e.png

That area off St Cats looks great but is empty of fish. I burned more fuel than I care to remember over a couple of seasons fishing there and it was hard work every trip, with many, many blanks. 😭

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...