Kane Posted September 19, 2023 Share Posted September 19, 2023 Hey All, I've been given an old fishing boat, which is in a very poorly state. Much work needs doing, including a completely new transom, and a hell of a lot of new fibreglassing. The work I can do, it looks really bad, and it is in places, but she will go back in the water where she belongs. Thing is... I have absolutely no idea what she is, even the previous owner had no idea. It would help enormously with choosing the right engine, etc. Anyone got any ideas on make/model please? Many thanks. Malc 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted September 19, 2023 Share Posted September 19, 2023 Hi Kane, Welcome to the site. Nice freebie. Quite a project though going by your description. Good luck with it. How about starting a rebuild thread in the Project Boats section to keep us updated on your progress. As for what make/model she is... not sure. Looks familiar but I can't place her. Maybe a Shetland 535. Window configuration look the same, but the window shape on yours is more angular than the 535's unless yours is a very early example. Hull shape similar but not identical unless, again, yours is very early. Any idea what year/how old she might be? Quote Link to comment Share on other sites More sharing options...
Kane Posted September 19, 2023 Author Share Posted September 19, 2023 Hi Andy, I'm all for doing a rebuild thread from start to finish, I hadn't realised there was a project boats section. Sounds like a plan though. 🙂 I thought Shetland too but as you say the windows and the top of the hull are not right. The sweep on the sides doesn't match properly with the 535 either. Tried comparing it to various makes and models with Google images but there's always something doesn't match up. Very frustrating lol. I'm thinking mid 70s - early 80s, but again, not dead sure. 😞 Andy135 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted September 20, 2023 Share Posted September 20, 2023 @Kane welcome to the sight. I originally thought Picton or Mayland, but the window profile does not quite match up. Is there no manufacturers stamp anywhere? Sometimes they are hidden behind a bulkhead or on the rear of the transom! Quote Link to comment Share on other sites More sharing options...
daio web Posted September 20, 2023 Share Posted September 20, 2023 hi welcome kane it could be a micro plus i will try and do some reseach for you Quote Link to comment Share on other sites More sharing options...
Geoff Posted September 21, 2023 Share Posted September 21, 2023 (edited) Welcome aboard. Nothing like a Shetland or Microplus. I think it is a Mariner, not from the 80's, but probably 70's, or late 60's. Take no notice of these youngsters who all believe that my boat will never float! I wish you the very best of luck with you "M" project. Geoff. Edited September 21, 2023 by Geoff Quote Link to comment Share on other sites More sharing options...
Geoff Posted September 21, 2023 Share Posted September 21, 2023 (edited) Just looked at some Mariner images, and they seem to have an additional swage line between the chine and the deck, so now no longer sure. Geoff. Edited September 21, 2023 by Geoff Quote Link to comment Share on other sites More sharing options...
Geoff Posted September 21, 2023 Share Posted September 21, 2023 44 minutes ago, JonC said: Disappointed here @Geoff, this was your big chance to shine and you’ve let us all down. I agree Jon, I think it a great pity that you scared Clinker away! Geoff.🙂 Andy135 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted September 21, 2023 Share Posted September 21, 2023 3 hours ago, Geoff said: I agree Jon, I think it a great pity that you scared Clinker away! Geoff.🙂 Touché! There seems to be a theme here. @Clinker, @headlight, @GPSguru, all scared off... Geoff 1 Quote Link to comment Share on other sites More sharing options...
daio web Posted September 22, 2023 Share Posted September 22, 2023 it could be a early mariner all the best bud Quote Link to comment Share on other sites More sharing options...
Geoff Posted September 22, 2023 Share Posted September 22, 2023 4 hours ago, daio web said: it could be a early mariner all the best bud Mariner is still the closest that I can think of, I only said that I was no longer sure! The under chine line and the cabin lines look similar, but window shape is different. If it is not a Mariner (built by a company called Marina in Worcestershire) I do think that there may be some connection there. Whatever it is the underwater shape looks purposeful. Geoff. daio web 1 Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted September 22, 2023 Share Posted September 22, 2023 i have not a clew eather , oh welcome mate Quote Link to comment Share on other sites More sharing options...
suzook12 Posted September 29, 2023 Share Posted September 29, 2023 Welcome Kane, look forward to seeing your progress. Done some research and reckon I know what it is I know what it is...... It's a "boat", hope that helps 🤣 Quote Link to comment Share on other sites More sharing options...
Kane Posted October 6, 2023 Author Share Posted October 6, 2023 (edited) Hi All Thankyou for the warm welcome. I have been advised that it is a very early Marina GT16 , based on the GT16 offshore racing model designed to take 2 x 50hp motors. Apparently a classic, so I really have to get her restored now, receipts be damned lol. Luckily I can do the repairs and fit her out myself as far as the labour part go so some savings there. I think looking more closely, that the windows have been re-shaped, and made bigger. They're not in rubber seals, they've had wood framing glued on inside and out, well, before it rotted and fell off. 😄 Later model pictured here: Marina GT16 Sportboat And Breakback Trailer - Project for sale from United Kingdom (boats-from.co.uk) Had her moved now to a place I can work on her, albeit outdoors. Considering I live on an island, there is a dearth of indoor spaces available. 😞 Meh, tarps will do. 🙂 Edited October 6, 2023 by Kane Messed up a sentence Malc, Geoff, Saintly Fish and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Geoff Posted October 7, 2023 Share Posted October 7, 2023 Well done for getting to the bottom of it. I said that I thought it a Mariner from the late 60's on (I am only saying this to give JonC something to put in his pipe and smoke it). Nice to hear you may have a "classic". We look forward to seeing some pics of your progress. Geoff. 🙂 Kane and Andy135 2 Quote Link to comment Share on other sites More sharing options...
Kane Posted October 7, 2023 Author Share Posted October 7, 2023 Thanks Geoff, it'll be fun anyway. 😄 JonC, should I start another thread for it, now I know what it is, or leave everything here you reckon? Cheers Kane Geoff 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted October 7, 2023 Share Posted October 7, 2023 1 hour ago, Kane said: Thanks Geoff, it'll be fun anyway. 😄 JonC, should I start another thread for it, now I know what it is, or leave everything here you reckon? Cheers Kane Leave it all here - I'll move the thread over to Project Boats 👍 Kane 1 Quote Link to comment Share on other sites More sharing options...
Kane Posted October 10, 2023 Author Share Posted October 10, 2023 Have been reading up on adding flotation to these older small boats, a lot of the examples being for a 600lb boat. Mine weighs nearly twice that, and has zero installed buoyancy! 😮 I've seen the calculators, etc., but to make this wee boat anywhere near a neutral buoyancy, I'd have to fill the entire interior in closed cell foam blocks. Has anyone any actual experience of retro fitting an old fibreglass boat with flotation before I go any further? Cheers Kane Quote Link to comment Share on other sites More sharing options...
suzook12 Posted October 11, 2023 Share Posted October 11, 2023 pit balls in the voids is a common one, as is plastic bottles with the lid sealed on. You may be cutting panels out etc to get them in. Many are done when putting a new deck down after replacing rotten stringers and the like. Quote Link to comment Share on other sites More sharing options...
Andy135 Posted October 12, 2023 Share Posted October 12, 2023 5 hours ago, suzook12 said: pit balls in the voids is a common one, as is plastic bottles with the lid sealed on. You may be cutting panels out etc to get them in. Many are done when putting a new deck down after replacing rotten stringers and the like. Play pit balls lose their air over time. We had a load for the kids and quite a few of them went soft and mis-shapen. Plastic bottles with lids siliconed on would be a better (if more laborious) option in my view. Quote Link to comment Share on other sites More sharing options...
Andy135 Posted October 12, 2023 Share Posted October 12, 2023 Just now, JonC said: Squirt foam the entire thing, then fill the fucker up with it then carve out a new cockpit area to suit your needs. Quote Link to comment Share on other sites More sharing options...
daio web Posted October 12, 2023 Share Posted October 12, 2023 empty pop bottles is your best bet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.