Jump to content

Simrad NSS EVO3


Recommended Posts

We have a couple of Simrads on our Pirate and not overly happy with them at the minute. Firstly can’t get the radar to work and the other issue is the boat icon seems to  crab sideways across te screen rather than point in the direction we are travelling. I have added a direction line yesterday which does at least point in the direction of travel but would be nice if the icon was facing the same way. Pictures below of the icon and the screens when trying to use radar. Any help most welcome, thanks

IMG_1414.jpeg

IMG_0878.jpeg

IMG_0877.jpeg

IMG_0876.jpeg

IMG_0875.jpeg

Edited by Dicky
Link to comment
Share on other sites

Personally it may be something you need to run through with Simrad on the phone. Have you checked no pins aren't bent on cables and connections and all electrical fitting to the radar. Do you put your phone or a speaker of any kind close to the unit as that will cause that sideways crabbing from the first image. Have you done a heading calibrate ?I don't use radar, so have no experience but I have owned Simrad units and use them on several other boats and find them problematic, hence why I no longer have them.

Link to comment
Share on other sites

Posted (edited)
22 hours ago, JDP said:

Personally it may be something you need to run through with Simrad on the phone. Have you checked no pins aren't bent on cables and connections and all electrical fitting to the radar. Do you put your phone or a speaker of any kind close to the unit as that will cause that sideways crabbing from the first image. Have you done a heading calibrate ?I don't use radar, so have no experience but I have owned Simrad units and use them on several other boats and find them problematic, hence why I no longer have them.

No phone or speaker near the unit, will look into a heading calibration when next down but manual is crap. Thanks 

Edited by Dicky
Link to comment
Share on other sites

11 hours ago, Gordmac said:

My Garmin plotter does that, the boat direction comes from the fluxgate compass for the autopilot. Switch that off and the correct direction is displayed. 

We don't have autopilot but will check to see if there is a setting for a fluxgate compass on the plotter, thanks 

Link to comment
Share on other sites

Need to recalibrate the compass, you basically drive round in a circle slowly while in calibration mode, have a look on YouTube it’s much quicker than the manual to understand! 
 

for the radar check the connection at the Radome and clean it up, they are prone to water ingress, msg need to quick clean ti getting it up a d running. 
 

if all else fails, I’ll give you a tenner for it 😉 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...