Saintly Fish Posted October 14, 2020 Share Posted October 14, 2020 I found this surprise a couple of weeks ago when I went to warm the engine in readiness for an oil change. At first it appeared to just be the exhaust gasket ... But after removal, I scrapped a piece of black carbon off and it exposed a hole in the housing... After many phone calls and high quotes ranging from £1700 - £2450 + vat for a new oem turbo, I managed to find a Turbo specialist who has welded, refurbished and painted the old one to look like new. And with a 1 year warranty. This will be collected on Friday morning. Pics of the newish unit to follow ! MegaByte and Andy135 2 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted October 14, 2020 Share Posted October 14, 2020 Ooh! Good post. Looking forward to seeing the new unit installed 🤓 Saintly Fish 1 Quote Link to comment Share on other sites More sharing options...
jonnyswamp Posted October 14, 2020 Share Posted October 14, 2020 That's a result and back on the water for the weekend ? Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 14, 2020 Author Share Posted October 14, 2020 45 minutes ago, jonnyswamp said: That's a result and back on the water for the weekend ? Maybe not this weekend but I’ll be aiming for the next one for sure !👍🏻 jonnyswamp 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 14, 2020 Author Share Posted October 14, 2020 3 minutes ago, JonC said: I remember telling you I suspected your turbo was leaking smoke a month or so back Really....? funny, I don’t remember that 🤔 Quote Link to comment Share on other sites More sharing options...
suzook12 Posted October 14, 2020 Share Posted October 14, 2020 I didn't rub anything!!!!! Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 17, 2020 Author Share Posted October 17, 2020 So I picked up the refurbed turbo this morning.. it looks pretty good to me... so after parting with £680 + vat, I headed down to the boat to start to fit it on.. 4 hours later and an achy back, I’m all connected back up. just the coolant to re fill tomorrow and then run her up to see how good a job the turbo shop (and me) have done ! 😬 Andy135 and iowspence 2 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted October 17, 2020 Share Posted October 17, 2020 Top work 👍 Fingers crossed it all goes smoothly tomorrow and you gain 5kts to boot 🤞 Saintly Fish 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 17, 2020 Author Share Posted October 17, 2020 2 minutes ago, Andy135 said: Top work 👍 Fingers crossed it all goes smoothly tomorrow and you gain 5kts to boot 🤞 Yeah that’d be great. But, if it doesn’t I’ll have Pete to blame 👍🏻 Quote Link to comment Share on other sites More sharing options...
suzook12 Posted October 17, 2020 Share Posted October 17, 2020 She'l be right....👍 Saintly Fish 1 Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted October 18, 2020 Share Posted October 18, 2020 neal and i had an exsorsting morning, but seems to be allright know. i enjoyed the gided tour. including the cushions. ithought neals cube hole was small but pore neal had to get into a smaller hole. i was not shore if he would come out of it in one peace' there was no fluid in the air Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 18, 2020 Author Share Posted October 18, 2020 Thanks for your help this morning Pete, glad to eventually get the issue solved and sorted just sorry we never made it out for a sea trial . Especially as you got up extra early ! captin slows old outlaw 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 18, 2020 Author Share Posted October 18, 2020 So Pete and I were on the boat at 8.45 this morning. I was hoping that after filling the coolant we could just push off and go on a sea trial. But as these things go it never happened. fired up the engine and we got a puff of exhaust gas right up Pete’s nose. Oh dear I said. being that the turbo is in quite an awkward position and yesterday I forgot my glasses, I thought that I’d maybe not aligned things quite right . so we stripped off the clamp and re aligned. Same problem. another two attempts with the same results saw me break out the temp gum exhaust paste. Just a slither around each side of the gasket and all was well. No smoke in the engine bay. Horaah ! by this time it was 11am and I had to get home to take Leo for another riveting under 10’s footie match. Leo and his team won comfortably 6-1 !! Pete, iou a trip out mate 👍🏻 Andy135 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted October 18, 2020 Author Share Posted October 18, 2020 18 minutes ago, JonC said: You could of just gun gum in the hole to start with, saved yourself £900. Yeah I don’t think so Quote Link to comment Share on other sites More sharing options...
suzook12 Posted October 18, 2020 Share Posted October 18, 2020 My day went a similar way, my lad does rink (roller) hockey. He trains Friday nights and Sun morn/afternoon, and 2 weekends of the month he has national training.... Then, If it's not raining, there is motocross...... Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted November 6, 2020 Author Share Posted November 6, 2020 So today was the day that I was finally able to get my first mate (Leo) down to the boat for a shake down trip after the fitting of the refurbished turbo. What with work and poor weather chances just didn’t crop up. But today the stars aligned. Quick check of the engine bay to make sure the turbo was still connected and not in the bilge, and we were off. So the engine ran well, no worse than before. Pick up and throttle response seemed a tad quicker. Overall top speed was still lacking 4 knots and revs still down by 150. I’m putting this down to a dirty bum and possibly a dirty propeller? I think the extra weight of 3 additional batteries doesn’t help much. Still waiting for Andy to help me fit them. I did however notice an oily patch on my new air filter cover that seems to spray from a breather pipe. Any ideas why this would be ? Plenty of oil still in the engine. One last shot of the engine bay, just because I took it. overall I’m happy that the boat still runs as it did, with the bonus of no exhaust smoke in the engine bay. iowspence and Geoff 2 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted November 6, 2020 Share Posted November 6, 2020 Is that a factory or aftermarket air filter? I'm wondering whether your engine has a crankcase breather that is supposed to route into the air box after the filter, so that the oil mist is burned rather than vented to atmosphere. Green credentials and all that... Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted November 6, 2020 Author Share Posted November 6, 2020 50 minutes ago, Andy135 said: Is that a factory or aftermarket air filter? I'm wondering whether your engine has a crankcase breather that is supposed to route into the air box after the filter, so that the oil mist is burned rather than vented to atmosphere. Green credentials and all that... 🤷🏻♂️ Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted November 6, 2020 Author Share Posted November 6, 2020 3 minutes ago, JonC said: How’s the game # cantstayaway Saints 1 up at half time. Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted December 1, 2020 Author Share Posted December 1, 2020 I had a spare day today. I contemplated a cheeky single handed session off the bramble bank or the south side of the solents north channel. The mrs needed me to take nipper to school though so that put paid to catching the tide. So I went to the boat and fitted my oil catch can. I’ve had it a couple of weeks but didn’t get an opportunity to fit it. So here it is in all its glory. I also dislocated my hip, which then allowed me to gain access to the chineseespacher and re route the air intake pipe. another couple of jobs ticked off the list. Oh, and I squirted some silicone around my deck light cable, as the old silicone had peeled away, and water was dripping into the wheel house walls and running out of the saloon light when I accelerated . Andy135 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted December 1, 2020 Author Share Posted December 1, 2020 1 minute ago, JonC said: I had the day off today, planned to sneak off down the boat but the weather was awful here, cold wind from the north no fun at all. Can’t be as cold as Ice swimming in Norway you pansy! Quote Link to comment Share on other sites More sharing options...
Andy135 Posted December 1, 2020 Share Posted December 1, 2020 7 minutes ago, Saintly Fish said: I had a spare day today. I contemplated a cheeky single handed session off the bramble bank or the south side of the solents north channel. The mrs needed me to take nipper to school though so that put paid to catching the tide. So I went to the boat and fitted my oil catch can. I’ve had it a couple of weeks but didn’t get an opportunity to fit it. So here it is in all its glory. I also dislocated my hip, which then allowed me to gain access to the chineseespacher and re route the air intake pipe. another couple of jobs ticked off the list. Oh, and I squirted some silicone around my deck light cable, as the old silicone had peeled away, and water was dripping into the wheel house walls and running out of the saloon light when I accelerated . A productive day then! Although why you wanted to ruin a perfectly good saloon shower is beyond me... 🤣 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted December 1, 2020 Author Share Posted December 1, 2020 Just now, Andy135 said: A productive day then! Although why you wanted to block up your saloon shower is beyond me... 🤣 Well yes, it did make for an interesting talking point. However a puddle of ice on the worktop is probably not the best idea for over winter. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.