captin slows old outlaw Posted January 9, 2021 Share Posted January 9, 2021 well i have heard so many diferent things about uptiding please put me strate on this. i know you yous a longer road than the normal 40 \ 50 lb rod i have only seen this done where a 6 oz whaite will do why not youse your beach road Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 Beach rod is too long, usual uptidersare around 9 - 10 ft have a different action to make it easier to load up for casting as you have limited room. Depending where you fish and the depth you may end up with as much as 10oz to get it to hold. Quote Link to comment Share on other sites More sharing options...
suzook12 Posted January 9, 2021 Share Posted January 9, 2021 Beach rods are a bit long mate, and that can be awkward on a full boat. Also their rating is a bit low. Uptides are usually 9ft6, and can cast up to 10-12 oz leads (more at a push 😉). The length helps get that bow of line away from the boat and downtide lines.... 70ft of water is about as deep as you want to be uptiding..... Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted January 9, 2021 Author Share Posted January 9, 2021 1 minute ago, Scotch_Egg2012 said: Beach rod is too long, usual uptidersare around 9 - 10 ft have a different action to make it easier to load up for casting as you have limited room. Depending where you fish and the depth you may end up with as much as 10oz to get it to hold. normaly the lead is 1lb to 2 ib , in the solent i o white area, unles you are in shelterd arears, evan from calshott beach i have had tuble with 8 oz brake away on some tides Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted January 9, 2021 Share Posted January 9, 2021 @JonC will put you straight Pete. It’s pretty much the only way he fishes I believe. Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted January 9, 2021 Author Share Posted January 9, 2021 Just now, suzook12 said: Beach rods are a bit long mate, and that can be awkward on a full boat. Also their rating is a bit low. Uptides are usually 9ft6, and can cast up to 10-12 oz leads (more at a push 😉). The length helps get that bow of line away from the boat and downtide lines.... 70ft of water is about as deep as you want to be uptiding..... i agree but i every time i see the uptide rod out, the line it ends up dead astern with the outhers. in a mess. i tend to put a heavyer whaite on and hand throw it, hopfully it stays where it lands i know it can be dangerouse , but i youse a modyfied setup so the hock is on the outside of the boat plus im not throwiit that far Quote Link to comment Share on other sites More sharing options...
suzook12 Posted January 9, 2021 Share Posted January 9, 2021 I think you need to look at your terminal tackle pete. You don't use breakaway leads except in light tides, we use long tail fixed wire leads, then the bow in the line is equally important. You have to put a big enough bow in the line that the tide is pullung the lead tail down, too little and the lead tail is pulled up then the lead lets go..... Takes a bit of getting used to, when the tide is running hard, if you cast say 30ft from the boat, allow enough line out so that it is running pretty much parallel with the boat. Most bites from decent fish are dropbacks and dislodge the lead..... captin slows old outlaw and JonC 1 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted January 9, 2021 Share Posted January 9, 2021 9 minutes ago, JonC said: I rarely use a lead of more than 7oz, although at times an 8oz becomes necessary. As suzook says it’s all about letting a bow of line out to get the lead working properly. You could send 3lb of lead uptide and it would still get bounced back down if you have it wound down too tight. How do you tell when enough of a line is set out? The reason I ask is because whenever I’ve tried it the line always ends up looking as if he weight has just gone down tide. Quote Link to comment Share on other sites More sharing options...
suzook12 Posted January 9, 2021 Share Posted January 9, 2021 Whenever I end up next to person who has never uptidr fished before (too often lol), I usually just get them to set it as described above, as though tide is ripping, so 30ft straight in front of you, release enough line so that bow is parallel to boat. On your own boat, you can actually cast uptide (hence the name) and fish two or three rods at varying positions along the tide. Eventually, you will get a feel for how big a bow a tide actually needs. In shallower water, sometimes uptide is the only method that holds bottom, but watch for weed that will drag you in to one hell of a birds nest. Shame currently you can't go out with either myself or Jon, as I'm sure we would soon get you sorted. Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 8 hours ago, captin slows old outlaw said: normaly the lead is 1lb to 2 ib , in the solent i o white area, unles you are in shelterd arears, evan from calshott beach i have had tuble with 8 oz brake away on some tides I fish Nab, Needles and Solent, I was at East Lepe a few weeks back on a fair sized tide uptiding on an 8oz weight whilst the downtider on braid had nearly a pound to hold. As others have pointed out the design of the weight and more importantly how much line you put out in the bow is the difference between holding bottom or not. Quote Link to comment Share on other sites More sharing options...
Odyssey Posted January 9, 2021 Share Posted January 9, 2021 Anyone uptide with braid? Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 (edited) 7 hours ago, Saintly Fish said: How do you tell when enough of a line is set out? The reason I ask is because whenever I’ve tried it the line always ends up looking as if he weight has just gone down tide. Around the solent it looks exactly like you are down tiding, I out enough line so that it will be trailing as if downtiding, I rarely need above 8oz. How you cast in relation to the tide also influences how well it holds, i.e. When the tide is running hard I will be casting up towards the anchor rope a letting a big bow out, as the tide eases you can bring the cast further down to around 90 degrees from the side of the boat. Picture was taken last year down by Selsey (quite a tide run) I had cast up towards the anchor and this shows where my line ended up Edited January 9, 2021 by Scotch_Egg2012 Saintly Fish and Andy135 2 Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 6 minutes ago, Odyssey said: Anyone uptide with braid? I have heard of it but I prefer mono as it catches more tide and helps pull the weight into the seabed. I use 25lb mono which is a nice balance used to use 30lb but it's much more of a bugger to hold in bigger tide runs Quote Link to comment Share on other sites More sharing options...
Andy135 Posted January 9, 2021 Share Posted January 9, 2021 4 minutes ago, Scotch_Egg2012 said: I have heard of it but I prefer mono as it catches more tide and helps pull the weight into the seabed. I use 25lb mono which is a nice balance used to use 30lb but it's much more of a bugger to hold in bigger tide runs In theory then we could use whatever braid has the same diameter as 25lb mono? Or is there some other reason that mono is preferable? Reason I ask is that I've done a bit of uptiding, with braid, and it seemed to work ok, and I'm not sure I can be buggered to spool up a reel with mono again - I only ever use mono for leader material these days. Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 Just now, JonC said: I use 18 or 20lb no leader. Leaders have no place on a boat if casting. Same here Jon no leader for me, I may try 20lb although some of the spots I fish have horrendous weed and the 25lb helps get the balls in JonC 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted January 9, 2021 Share Posted January 9, 2021 Just now, JonC said: This is one good reason. Yeah, that's funny but not really realistic, given that on the boat we're only really giving it a lob, not a full beans cast, and nothing that can't be managed with an educated thumb. Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 1 minute ago, Andy135 said: In theory then we could use whatever mono has the same diameter as 25lb mono? Or is there some other reason that mono is preferable. Reason I ask is that I've done a bit of uptiding, with braid, and it seemed to work ok, and I'm not sure I can be buggered to spool up a reel with mono again - I only ever use mono for leader material these days. I think with diameter or poundage you need to find out what works best for you, the reason I use 25 and not 30 is on spots like the spoils it's 80ft and the tide can run hard 30 is a bugger to keep the weight dug in I like Berkeley 25 as that holds well, I haven't dropped to 20 because of the amount of weed we can come across especially Selsey area. The 25 gives me a bit more confidence to lean into it and get the gear back. The reason I use mono is I find braid is an ass to cast on a multiplier and it's easier to get the weight dug in with mono as it catches more tide, again though it's all what works for you Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 3 minutes ago, Andy135 said: Yeah, that's funny but not really realistic, given that on the boat we're only really giving it a lob, not a full beans cast, and nothing that can't be managed with an educated thumb. Sometimes a bit more than a lob is required though, especially if casting up towards the anchor. JonC 1 Quote Link to comment Share on other sites More sharing options...
suzook12 Posted January 9, 2021 Share Posted January 9, 2021 And then theres casting a 2nd/3rd rod downtide to clear the downtiders.... I don't know anyone round this way that uses braid to uptide, kinda goes against the idea of using the tide to hold the lead.... Quote Link to comment Share on other sites More sharing options...
Andy135 Posted January 9, 2021 Share Posted January 9, 2021 Well, this focus on mono seems to be to be all about getting the lead to dig in, which physically speaking, could be achieved with the same diameter braid or maybe an extra long length of leader. Not sure I could ever go back to mono straight through - just seems so antique. And as for casting with braid, the shore boys seem to manage fine at 100+ yards, so I reckon I'll be ok at 30-50. Happy to be persuaded otherwise though. Quote Link to comment Share on other sites More sharing options...
Scotch_Egg2012 Posted January 9, 2021 Share Posted January 9, 2021 1 minute ago, Andy135 said: Well, this focus on mono seems to be to be all about getting the lead to dig in, which physically speaking, could be achieved with the same diameter braid or maybe an extra long length of leader. Not sure I could ever go back to mono straight through - just seems so antique. And as for casting with braid, the shore boys seem to manage fine at 100+ yards, so I reckon I'll be ok at 30-50. Happy to be persuaded otherwise though. It's whatever works for you. Andy135 1 Quote Link to comment Share on other sites More sharing options...
GPSguru Posted January 9, 2021 Share Posted January 9, 2021 Here is Lyme bay we don't uptide, never seen anybody using that method. We normally fish in 60 - 80ft of water and if I want to fish away from the boat then I select a lead that will hold bottom but also trott away from the boat downtide which is usually about an ounce or two less than a lead which keeps you vertical fishing. Quote Link to comment Share on other sites More sharing options...
GPSguru Posted January 9, 2021 Share Posted January 9, 2021 10 minutes ago, JonC said: Does this not just end up kiting? I like to know that my lead is on the bottom. Bear 🐻 in mind though that uptiding or boat casting is generally considered a tactic for shallow water to get away from the noise of the boat. No, never had an issue with tangles, however, the selection of lead type and size is critical for trotting back in the tide. We tend to use cannon ball leads and quite stiff short fluoro hook lengths. TBH, the tactic is very effective if there are a couple of rods fishing vertical, as the fish find the trotted bait first. The only casting I do from the boat is lure fishing for Bass on the estuary sandbar, and for Pollock on a couple of shallow reefs. Quote Link to comment Share on other sites More sharing options...
Andy135 Posted January 9, 2021 Share Posted January 9, 2021 16 minutes ago, JonC said: The guys you see casting from the shore, are you talking about multipliers or fixed spool? Both. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.