Ivan Tuna Posted January 19, 2021 Share Posted January 19, 2021 I was looking to fit some individual rod holders to the rails - what do you guys recommend? Thanks, Ivan Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted January 19, 2021 Share Posted January 19, 2021 I’ve fitted 4 of these on my wheel house roof grab rails. From China but have proved good quality. eBay 254787790252 GPSguru 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted January 19, 2021 Share Posted January 19, 2021 I've used these ones on Apache - I prefer these to the straight tubular version as these ones have a thin rod at the base of the holder to fit into a butt gimbal - means the rod is held whichever way you place it e.g. keeps the reel upright. https://www.amazon.co.uk/dp/B083QHBVCM/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B083QHBVCM&pd_rd_w=9Thu4&pf_rd_p=63c922c2-0d1e-424b-861c-70cf96420fed&pd_rd_wg=OZLEW&pf_rd_r=69F1CP3SCVQXXY7FJTYQ&pd_rd_r=0d2aa56a-1bd5-4230-9e9e-cdd1e783883f&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFLTjdYTURKRU41UkwmZW5jcnlwdGVkSWQ9QTAzOTk2NTY1RkxQVklZSlFSOUgmZW5jcnlwdGVkQWRJZD1BMDgyODQwNzNUWVFFTFBPU0g0RU4md2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl GPSguru 1 Quote Link to comment Share on other sites More sharing options...
Ivan Tuna Posted January 19, 2021 Author Share Posted January 19, 2021 Thanks guys much appreciated Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted January 20, 2021 Share Posted January 20, 2021 Depending on your boats set up and what style your after... These are supposed to be versatile and good quality. https://www.railblaza.com/uses/boating/ Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted January 22, 2021 Share Posted January 22, 2021 i have got servace holders and 2 cheep and narsty plastick holders ( i beleve desined for conoes ) which i will replace in 2022 and reposition them, Quote Link to comment Share on other sites More sharing options...
jonnyswamp Posted January 22, 2021 Share Posted January 22, 2021 (edited) On 1/19/2021 at 9:30 PM, Andy135 said: I've used these ones on Apache - I prefer these to the straight tubular version as these ones have a thin rod at the base of the holder to fit into a butt gimbal - means the rod is held whichever way you place it e.g. keeps the reel upright. https://www.amazon.co.uk/dp/B083QHBVCM/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B083QHBVCM&pd_rd_w=9Thu4&pf_rd_p=63c922c2-0d1e-424b-861c-70cf96420fed&pd_rd_wg=OZLEW&pf_rd_r=69F1CP3SCVQXXY7FJTYQ&pd_rd_r=0d2aa56a-1bd5-4230-9e9e-cdd1e783883f&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFLTjdYTURKRU41UkwmZW5jcnlwdGVkSWQ9QTAzOTk2NTY1RkxQVklZSlFSOUgmZW5jcnlwdGVkQWRJZD1BMDgyODQwNzNUWVFFTFBPU0g0RU4md2lkZ2V0TmFtZT1zcF9kZXRhaWwmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl I have the same as these, recently added another 2 to my tub Not the same name as the above link, but identical (these are probably all Chinese copies) and £50 for 2 delivered Have seen them around £20 each, but unsure of quality Mine seem strong enough and grip the rail well, but time will tell on the quality of the stainless I spose Stainless Steel Fishing Rod Holder Boat Tackle Clamp On Rail Mount | eBay Edited January 22, 2021 by jonnyswamp Link added Andy135 1 Quote Link to comment Share on other sites More sharing options...
Maverick Posted January 22, 2021 Share Posted January 22, 2021 I have had those on my boat for near 2 years and when cleaned they look just the same as when first fitted Andy135 1 Quote Link to comment Share on other sites More sharing options...
Ivan Tuna Posted September 12, 2021 Author Share Posted September 12, 2021 Weekend project Andy135 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted September 12, 2021 Share Posted September 12, 2021 Looks good Ivan. DIY effort? Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted September 12, 2021 Share Posted September 12, 2021 Where do the rods go? Quote Link to comment Share on other sites More sharing options...
mick Posted September 12, 2021 Share Posted September 12, 2021 21 minutes ago, Saintly Fish said: Where do the rods go? In the rod holders🙄😄 JonC 1 Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted September 12, 2021 Share Posted September 12, 2021 2 hours ago, mick said: In the rod holders🙄😄 Ahh ok, now i see them. Sorry i was blown away by the tea tray. Quote Link to comment Share on other sites More sharing options...
Ivan Tuna Posted September 12, 2021 Author Share Posted September 12, 2021 🙄🤔 Quote Link to comment Share on other sites More sharing options...
Ivan Tuna Posted September 12, 2021 Author Share Posted September 12, 2021 4 hours ago, Andy135 said: Looks good Ivan. DIY effort? No - as part of the fishing kit there’s a stainless steel bar to pull a bait net over - it drops into 2 holes on the rails. Had no intention of using it but the Railblaza bait table and two rod holders later it looks a proper designed portable bit of kit Quote Link to comment Share on other sites More sharing options...
Ivan Tuna Posted September 12, 2021 Author Share Posted September 12, 2021 So the pins on the end drop into 2 holes on my side rails. Andy135 and mick 2 Quote Link to comment Share on other sites More sharing options...
Captain Sensible Posted November 14, 2021 Share Posted November 14, 2021 (edited) Noticed these worn fittings - look like poor mans Railblaza sockets - Emailed Railblaza they say nono you poor fool we don’t know it they is but if you measure we will sell you sumfing the same size ish so you don’t make more holes. https://imgur.com/a/30QXRou Does that link work? Trying to make the world a better place why would have rod holders so far back on the boat - anyone familiar with worn out holes care to comment? Edit: the surface mount fitting in the pictures is next to the high end 1” 1/2 rod holders Edited November 14, 2021 by Captain Sensible Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted November 14, 2021 Share Posted November 14, 2021 24 minutes ago, Captain Sensible said: Noticed these worn fittings - look like poor mans Railblaza sockets - Emailed Railblaza they say nono you poor fool we don’t know it they is but if you measure we will sell you sumfing the same size ish so you don’t make more holes. https://imgur.com/a/30QXRou Does that link work? Trying to make the world a better place why would have rod holders so far back on the boat - anyone familiar with worn out holes care to comment? Edit: the surface mount fitting in the pictures is next to the high end 1” 1/2 rod holders The link works! 👍🏻 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted November 14, 2021 Share Posted November 14, 2021 Link works but if you tap & hold on the images in Imgur in your phone, then select the option to Copy the image, you can then paste the link into your post and it'll embed the images themselves, rather than showing the link. Or from a computer, right click the image and select Copy Link Address, then paste the link into your post and the image will appear instead of the link. Quote Link to comment Share on other sites More sharing options...
captin slows old outlaw Posted November 14, 2021 Share Posted November 14, 2021 i prefer to hold my rod ., just like the feel of bite Quote Link to comment Share on other sites More sharing options...
Captain Sensible Posted November 14, 2021 Share Posted November 14, 2021 oohlaalaa Andy135 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted November 14, 2021 Share Posted November 14, 2021 16 minutes ago, Captain Sensible said: oohlaalaa 🤣👍👍👍 Quote Link to comment Share on other sites More sharing options...
Captain Sensible Posted November 14, 2021 Share Posted November 14, 2021 16 minutes ago, Captain Sensible said: oohlaalaa Suppose I was of adding handrails, then where to put rods out of the way, then bait table would be nice on a bar across the back of the boat. what is this witchcraft Quote Link to comment Share on other sites More sharing options...
Andy135 Posted November 14, 2021 Share Posted November 14, 2021 If you're adding a bar across the transom then you may as well just add a bolt-on rod holder either side of the bait table. Captain Sensible 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.