Jump to content

Come on then... who's out at the weekend?


Recommended Posts

5 hours ago, JDP said:

Here is another fine example just on the previous page from someone clearly not understanding the rules of this thread. How does this constitute going out on the weekend. Maybe the thread needs to head to a more simple Yes or No in regards to heading out on the weekend. 

This is engaging with a members post, it's encouragement and not a separate post. Well within the rules (that the SLT make up as we go!!). 

Link to comment
Share on other sites

On 6/14/2023 at 5:31 PM, LostPiker said:

trip planned for Saturday. Hopefully we'll get more than 10 yards off the slipway this time

Didn't make it to the slipway. Bypassed the oil level sensor and it is still reading low oil and guardian mode. Unwrapped the loom and checked the wires, cleaned all the connections and no change. Tried removing the sensor and checking it with a magnet and multimeter and it seems to work but there is a spot in the middle where the resistance goes to infinity and then reads again reconnected the sensor and held a magnet on the end so it should read as full and no change. 

Can't get any one to look at it until July so going to buy a new sensor and try again. Anyone know if you can get the software to properly read the codes for a laptop cheaply anywhere?

Link to comment
Share on other sites

2 hours ago, LostPiker said:

Didn't make it to the slipway. Bypassed the oil level sensor and it is still reading low oil and guardian mode. Unwrapped the loom and checked the wires, cleaned all the connections and no change. Tried removing the sensor and checking it with a magnet and multimeter and it seems to work but there is a spot in the middle where the resistance goes to infinity and then reads again reconnected the sensor and held a magnet on the end so it should read as full and no change. 

Can't get any one to look at it until July so going to buy a new sensor and try again. Anyone know if you can get the software to properly read the codes for a laptop cheaply anywhere?

Unlucky mate. Sorry I can't help with the soft ware, these things are above me!

Link to comment
Share on other sites

10 hours ago, LostPiker said:

Didn't make it to the slipway. Bypassed the oil level sensor and it is still reading low oil and guardian mode. Unwrapped the loom and checked the wires, cleaned all the connections and no change. Tried removing the sensor and checking it with a magnet and multimeter and it seems to work but there is a spot in the middle where the resistance goes to infinity and then reads again reconnected the sensor and held a magnet on the end so it should read as full and no change. 

Can't get any one to look at it until July so going to buy a new sensor and try again. Anyone know if you can get the software to properly read the codes for a laptop cheaply anywhere?

Careful, this is a yes or no thread. Management will be onto you staying this is a boating maintenance thread. 

Back on track, yes both days.

 

Link to comment
Share on other sites

6 hours ago, JDP said:

Careful, this is a yes or no thread. Management will be onto you staying this is a boating maintenance thread. 

Back on track, yes both days.

 

Not sure this sarcasm is befitting of you Jon. Maybe you should fall back in line before it's too late and you get a red flag and a reputation!! 

Link to comment
Share on other sites

17 hours ago, Saintly Fish said:

Not sure this sarcasm is befitting of you Jon. Maybe you should fall back in line before it's too late and you get a red flag and a reputation!! 

I was simply targeting a certain species over the weekend, however I didn't get a bite. Apologies 😊

Link to comment
Share on other sites

18 hours ago, JDP said:

I was simply targeting a certain species over the weekend, however I didn't get a bite. Apologies 😊

No need for apologies Jon - you did indeed get the bite that you wanted (from a member of the elite SLT). Geoff.🙂

Link to comment
Share on other sites

27 minutes ago, Geoff said:

No need for apologies Jon - you did indeed get the bite that you wanted (from a member of the elite SLT). Geoff.🙂

Fall in line, reputation and red flag. All words that can be attributed to you too young man! 

Link to comment
Share on other sites

Got a busy weekend of fishing coming up.

out at 3 Saturday morning to fish the Kentish knock for bass, it’s about a 70 mile round trip and then a 12 hour tope trip on Sunday on the Galloper. 
 I’ll be knackered at the end of this but hopefully worth it. 

Link to comment
Share on other sites

1 hour ago, Herbs73 said:

Got a busy weekend of fishing coming up.

out at 3 Saturday morning to fish the Kentish knock for bass, it’s about a 70 mile round trip and then a 12 hour tope trip on Sunday on the Galloper. 
 I’ll be knackered at the end of this but hopefully worth it. 

Nice - hope the weather is good for you. Keep us posted!

Link to comment
Share on other sites

1 minute ago, mick said:

I go out every day,not on boat as I haven`t got one , I just don`t like staying in.😀

Mick, I thought you had a rib on a trailer? Or am I mis-remembering?

Link to comment
Share on other sites

1 hour ago, JonC said:

We need to have some sort of order otherwise if the site is left unchecked we will have the likes of @JDP spamming pictures of possums on every post and I’m just not going to let that shit happen. 

Shhhh! We're having sundowners, look at that sky! 

Link to comment
Share on other sites

19 hours ago, JonC said:

Oh I thought you meant going to the galloper,that’s about 40 Miles off. Meant to be a very good bank though.

Has Scot got over his tantrum yet? 

The gallopers is a fair old way, probably a Bit too far for me. Scott has just about got over it, it took a lot  of counselling  and strong medication though. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...