GPSguru Posted April 23, 2021 Share Posted April 23, 2021 3 minutes ago, Andy135 said: Yep, got Gun Oil, which is a posh version of 3-in-1. Yes, that will do the job ........... great when I use it in the HW80 and it hydraulics, I get a tad more than 12ftlb then and a lot of smoke ! 🤣 Andy135 1 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted April 23, 2021 Author Share Posted April 23, 2021 8 minutes ago, GPSguru said: Yes, that will do the job ........... great when I use it in the HW80 and it hydraulics, I get a tad more than 12ftlb then and a lot of smoke ! 🤣 Ah, I miss my air rifles. Sold my Air Arms S400 a while back to a good friend and put the money into a shark reel... what can I say? They're just bigger dogfish 🤷♂️🐶🐟 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted April 24, 2021 Author Share Posted April 24, 2021 Well, the old motor still works. Rams have seen better days though. There's a chunky nick out of this one, which may be how the water got in (past the two ram o-rings). I'll run it for the rest of the season and look to change it over the winter. JonC and Saintly Fish 2 Quote Link to comment Share on other sites More sharing options...
Andy135 Posted April 24, 2021 Author Share Posted April 24, 2021 1 hour ago, JonC said: What’s going on with all the oxidation on the gel coat? Needs a good polish. Maybe you could come over and do it? Quote Link to comment Share on other sites More sharing options...
Andy135 Posted April 24, 2021 Author Share Posted April 24, 2021 Also got the new switch panel fitted and wired up. @jonnyswamp, mine does the same thing as yours - no auto-retract but a little motor actuation. I reckon I need to wire the orange wire into the ignition start wire (it's direct to +ve at present). I have a feeling the auto-retract will work as intended when the orange wire senses no current but the switch panel does. Saintly Fish, jonnyswamp and JonC 3 Quote Link to comment Share on other sites More sharing options...
jonnyswamp Posted April 25, 2021 Share Posted April 25, 2021 13 hours ago, Andy135 said: Also got the new switch panel fitted and wired up. @jonnyswamp, mine does the same thing as yours - no auto-retract but a little motor actuation. I reckon I need to wire the orange wire into the ignition start wire (it's direct to +ve at present). I have a feeling the auto-retract will work as intended when the orange wire senses no current but the switch panel does. I'll double check my wiring next time I'm down, but pretty sure I've wired it as it should be Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted April 29, 2021 Share Posted April 29, 2021 3 minutes ago, JonC said: You have been reported to the moderator! Quote Link to comment Share on other sites More sharing options...
Andy135 Posted April 29, 2021 Author Share Posted April 29, 2021 24 minutes ago, Saintly Fish said: You have been reported to the moderator! No moderators here Neil! Quote Link to comment Share on other sites More sharing options...
Saintly Fish Posted April 29, 2021 Share Posted April 29, 2021 Just now, Andy135 said: No moderators here Neil! 🤣 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.